- Usb Simulator Cable Xtr/aerofly/fms
- Usb Simulator Cable Xtr 2faerofly 2ffms Drivers For Mac Windows 7
- Usb Simulator Cable Xtr 2faerofly 2ffms Drivers For Mac Windows 10
Description
22 In 1 USB Flight Simulator For G7 G6.5 Phoenix 5.0 XTR FMS Aerofly
For transmitters with FrSky protocol, HobbyKing also offers the FrSky protocol USB wireless dongle (-0). If your transmitter is equipped with a trainer socket, the USB Simulator Cable XTR/AeroFly/FMS from HobbyKing (XTR01) is a very inexpensive alternative. Transmitter connection cable and adapters for various transmitters (except. Whether you are learning to fly from scratch or you are a quad junkie looking to hone your skills, a model flying simulator is an important tool for beginners and advanced pilots alike. A sim lets you fly 24/7 regardless of the weather, and you can crash your expensive model as many times as you like for free! This USB Simulator Interface comes with adapter cables to suit most radios including.
RC Flight Simulator 22 in 1 USB Cable for Realflight Phoenix Aerofly XTR FMS. C $23.88; Buy It Now. Save fms simulator cable to get e-mail alerts and updates on. USB Flight Simulator Adapter Cable for Phoenix, AeroFly, FMS UK STOCK - FREE SAME DAY 1ST CLASS SHIPPING Whether you are learning to fly from scratch or you are a quad junkie looking to hone your skills, a model flying simulator is an important tool for beginners and advanced pilots alike.
Item Name: 22 in 1 simulator
Language: Chinese,English
Support software: XP windows7 Windows8 Vista
Transmitter compatible: WLFY , JR , FUTABA , Walkera , FS , KDS
Features:
Latest 22 In 1 Simulator with standard USB interface
Support RealFlight G2/G3/G3.5/G4/G4.5/G5/G6.5/G7
Support PhoenixRC2.0/2.5/3.0/4.0/5.0
Support XTR FMS Aerofly
Only one unique series number version
Support online upgrade
For RC helicopter,quadcopter,airplane and FPV
Package Included:
1 x 22 In 1 USB Simulator
1 x 1.5m Audio Cable
1 x FUTABA Square Adapter
1 x WFLY Round Adapter
1 x ESKY/ FLYSKY /HOBBY KING Round Adapter Cable
2 x DVD
The USB side of the adapter behaves like a standard USB joystick (HID-Device).Therefore you don't need a driver for Windows or Linux (tested with Windows XP, Windows 7 and Ubuntu 9.10).In Mac OS it should work well too, but this is not yet tested.The adapter is ideal for use with a model aircraft simulator on the PC.
PPM
Most R/C remote controls provides a so-called PPM-signal.It consists of a pulse train with about 0.4 ms long pulses.The time interval tn between the pulses corresponds to the stick-positionof each channel. A time of 1.5 ms corresponds to the center position,1ms is the minimum and 2ms is the maximum position.A pulse train consists of n+1 pulses - for 5 channels thus 6 pulses. The pulse train is repeated every 20ms (50Hz).
Bild 2: The PPM signal of a remote control with 5 channels
On my R/C transmitter, the PPM signal can be found at the trainer port.The pinout of the 4-pin. Mini-DIN connector is shown in Bild 3.
Bild 3: pinout of the trainer port on the Esky Remote
An overview of the pin connection for the trainer jacks of other manufacturers (including Graupner, Robbe, Futaba, Multiplex, Hitec)can be found here: Pinouts of various R/C transmitters
Hardware
Bild 4: The schematics of the PPM2USB adapter
The circuit is quite simple and can be build on a breadboard or on a perfboard.The resistors and Zenerdiodes provide the USB-required voltage levels.The PPM signal is connected directly to the ICP-pin of the ATmega8.This works with signal levels from 1.5-5V.For the right timing an external 12MHz crystal is used.
Note: The ISP circuitry for programming the controllerwas left in the schematic way.
Usb Simulator Cable Xtr/aerofly/fms
PPM2USB with USBASP-Hardware
It is also possible to modify an USBASP-Dongle: USBASP to PPM2USB-Modification.
Software
The software was developed with the AVR-GCC tool chain and consists of three parts:
PPM decoder
The PPM decoder is completely interrupt driven.To measure the time, a 16 bit timer is used which is directly connected to the CPU clock (12MHz).
USB stack
The ATmega8 has actually no USB interface. However, it is possible to implement such in software.For this purpose the free USB stack called V-USB is used.
Main program
In the main program V-USB is initialized. Then the controller goes into ainfinite loop and transfers new joystick positions to the PC. It will only transfer data when the stick positionshave changed. This is indicated by brief flashes of the LED.
Usb Simulator Cable Xtr 2faerofly 2ffms Drivers For Mac Windows 7
Download
- The included hex file is compiled for a ATMega8. The source code can be easily adapted to other AVRs (if they are supported by V-USB).
- For programming, the described programming cable can be used.
- Fuses: external crystal (lfuse: 0xEF, hfuse: 0xC9)
- You may not use this work for commercial purposes
- Projekt-Download, Git-Repository
Flying-Model-Simulator FMS
For simulating model airplanes you can use the Free Flight Model Simulator (FMS).
Video 1: FMS test flight with A380 and Quadropcopter using the PPM2USB-adapter